****************************************************************************
		    Fast Ethernet Controller Provider Inc.
		       PCI 10/100 Fast Ethernet Adapter

	   NDIS 2 Driver For Windows for WorkGroup 3.11 Installation
	   ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

	   Copyright (C) 1999 Fast Ethernet Controller Provider Inc.
			     All rights reserved.
****************************************************************************

Installation Procedure
======================

  1. Start the Windows for Workgroup 3.11.

  2. Click the "Network" icon in the Program Manager Window.

  3. Click the "Network Setup" icon in the Network Window.

  4. Click the "Network" button in the "Network Setup" dialog box.

  5. Select the "Install Microsoft Windows Network" item and click "OK" 
     button in the "Networks" dialog box.

  6. When the "Network Setup" dialog box appears, select "Drivers.." button.

  7. Select "Add Adapters..." from the "Network Drivers" dialog box.

  8. Select "Unlisted or Updated Network Adapter".

  9. When the "Install Driver" window appears, insert the distribution
     diskette into drive A:, type "A:\WFW311" and press <Enter>. 

 10. Press <Enter> to select "PCI 10/100 Fast Ethernet Adapter".

 11. Click "Setup..." if you want to modify the advanced features.

 12. If you configure completed the advanced features or skip at last step
     then click "Close" in the "Network Drivers" dialog box. 

 13. Click "OK" in the "Network Setup" dialog box.

 14. Configure all Kinds of name(User, Workgourp, Computer) in the 
     "Microsoft Windows Network Name" dialog box, then click "OK" button.

 15. Close the "Install Driver" windows and restart the computer.


Sample Configuration Files
==========================

  1. CONFIG.SYS File

	FILES=30
	buffers=30
	STACKS=9,256
	DEVICE=c:\windows\HIMEM.sys
	DEVICE=C:\WINDOWS\IFSHLP.SYS
	LASTDRIVE=y

  2. PROTOCOL.INI File on Windows for Workgroups

	[network.setup]
	  version=0x3100
	  netcard=FastNIC,1,FastNIC
	  transport=ms$netbeui,MS$NETBEUI
	  lana0=FastNIC,1,ms$netbeui

	[protman]
	  DriverName=PROTMAN$
	  PRIORITY=MS$NETBEUI

	[FastNIC]
	  DriverName=FSTNIC$
	  SIA_MODE = AUTODETECT

	[MS$NETBEUI]
	  DriverName=netbeui$
	  SESSIONS=10
	  NCBS=32
	  BINDINGS=FastNIC
	  LANABASE=0

  3. AUTOEXEC.BAT File

	C:\WINDOWS\net start
	C:\WINDOWS\SMARTDRV.EXE
	@ECHO OFF
	PROMPT $p$g
	PATH C:\WINDOWS;
	SET TEMP=C:\WINDOWS\TEMP




All trademarks or brand names mentioned are properties of their respective
companies.