;DrIvEr DeScRiPtIoN
;****************************************************************************
;                                                                           *
;       Novell NetWare Server Driver Description File for SMC1211.LAN       *
;                                                                           *
;****************************************************************************

VER: 1.00
SYN: 1.00

DR SMC1211
{
    DES:    $SMC1211_1
    HELP:   $SMC1211_2
    PAR:    2.00
    PROD:   'PCI.1113.1211.1113.1211.*'

    FILE:   SMC1211.LAN
    TIME:   15

    PROMPT SLOT
    {
        DES:    $SMC1211_3
        HELP:   $SMC1211_4

        TYPE:   DECIMAL
        VAL:    1-65535
        DEF:    UNDEFINED
        OUT:    'SLOT=%s'
    }

    FRAME FrameSelect
    {
        CD:     $SMC1211_5
        CH:     $SMC1211_6
        CD:     $SMC1211_7
        CH:     $SMC1211_8
        CD:     $SMC1211_9
        CH:     $SMC1211_10
        CD:     $SMC1211_11
        CH:     $SMC1211_12
        DEF:    1,2,3,4
    }

    PROMPT NODE OPTIONAL
    {
        DES:    $SMC1211_13
        TYPE:   HEX
        VAL:    1-FFFFFFFFFFFE
        DEF:    UNDEFINED
        OUT:    'NODE=%s'
    }

}


DLANG:    4
;English
    $SMC1211_1  = "SMC EZ Card 10/100 (SMC1211TX)."
    $SMC1211_2  = "This driver supports PCI bus devices"
    $SMC1211_3  = "Slot"
    $SMC1211_4  = "Select the slot number that corresponds to the physical
                  expansion slot where the board is installed."
    $SMC1211_5  = "Ethernet_802.3"
    $SMC1211_6  = "Ethernet_802.3"
    $SMC1211_7  = "Ethernet_802.2"
    $SMC1211_8  = "Ethernet_802.2"
    $SMC1211_9  = "Ethernet_SNAP"
    $SMC1211_10 = "Ethernet_SNAP"
    $SMC1211_11 = "Ethernet_II"
    $SMC1211_12 = "Ethernet_II"
    $SMC1211_13 = "Node Address"


LANG:    6
;French
    $SMC1211_1  = "SMC EZ Card 10/100 (SMC1211TX)."
    $SMC1211_2  = "This driver supports PCI bus devices"
    $SMC1211_3  = "Slot"
    $SMC1211_4  = "Select the slot number that corresponds to the physical
                  expansion slot where the board is installed."
    $SMC1211_5  = "Ethernet_802.3"
    $SMC1211_6  = "Ethernet_802.3"
    $SMC1211_7  = "Ethernet_802.2"
    $SMC1211_8  = "Ethernet_802.2"
    $SMC1211_9  = "Ethernet_SNAP"
    $SMC1211_10 = "Ethernet_SNAP"
    $SMC1211_11 = "Ethernet_II"
    $SMC1211_12 = "Ethernet_II"
    $SMC1211_13 = "Node Address"

LANG:    7
;German
    $SMC1211_1  = "SMC EZ Card 10/100 (SMC1211TX)."
    $SMC1211_2  = "This driver supports PCI bus devices"
    $SMC1211_3  = "Slot"
    $SMC1211_4  = "Select the slot number that corresponds to the physical
                  expansion slot where the board is installed."
    $SMC1211_5  = "Ethernet_802.3"
    $SMC1211_6  = "Ethernet_802.3"
    $SMC1211_7  = "Ethernet_802.2"
    $SMC1211_8  = "Ethernet_802.2"
    $SMC1211_9  = "Ethernet_SNAP"
    $SMC1211_10 = "Ethernet_SNAP"
    $SMC1211_11 = "Ethernet_II"
    $SMC1211_12 = "Ethernet_II"
    $SMC1211_13 = "Node Address"

LANG:    8
;Italian
    $SMC1211_1  = "SMC EZ Card 10/100 (SMC1211TX)."
    $SMC1211_2  = "This driver supports PCI bus devices"
    $SMC1211_3  = "Slot"
    $SMC1211_4  = "Select the slot number that corresponds to the physical
                  expansion slot where the board is installed."
    $SMC1211_5  = "Ethernet_802.3"
    $SMC1211_6  = "Ethernet_802.3"
    $SMC1211_7  = "Ethernet_802.2"
    $SMC1211_8  = "Ethernet_802.2"
    $SMC1211_9  = "Ethernet_SNAP"
    $SMC1211_10 = "Ethernet_SNAP"
    $SMC1211_11 = "Ethernet_II"
    $SMC1211_12 = "Ethernet_II"
    $SMC1211_13 = "Node Address"

LANG:    14
;Spanish
    $SMC1211_1  = "SMC EZ Card 10/100 (SMC1211TX)."
    $SMC1211_2  = "This driver supports PCI bus devices"
    $SMC1211_3  = "Slot"
    $SMC1211_4  = "Select the slot number that corresponds to the physical
                   expansion slot where the board is installed."
    $SMC1211_5  = "Ethernet_802.3"
    $SMC1211_6  = "Ethernet_802.3"
    $SMC1211_7  = "Ethernet_802.2"
    $SMC1211_8  = "Ethernet_802.2"
    $SMC1211_9  = "Ethernet_SNAP"
    $SMC1211_10 = "Ethernet_SNAP"
    $SMC1211_11 = "Ethernet_II"
    $SMC1211_12 = "Ethernet_II"
    $SMC1211_13 = "Node Address"

;DrIvEr DeScRiPtIoN EnD