Garden Gates, Driveway Gates, Wood Fences, Garden Arbors, Porch swings by Prowell Woodworks Garden Gate Products Gate Hardware Contact Prowell Woodworks About Charles Prowell Woodworks Payment Gateway Site Map

prowell woodworks for garden gates
 

 

Our #14 Driveway Entrance Gate,
with a flanking panel and pedestrian gate.

>>How to Order


 

 

DRIVEWAY ENTRANCE GATES #14
This Driveway Gate Style is Base Price + 8%
Follow the link to the Base Price Table
 


The two verticals mid-stiles of the Drive Gate are to accept the motor arm of a staionary pad-mounted style motor.

* Driveway Gate #14 is often accompanied by Garden Gate #7

 
 
 
wood security gates
 
 
 


A Driveway Gate in Marin County as an assembly, flanked by a pedestrian gate on the right and a stationary Wood Fence Panel on the left, separated by four CPW Lighted Columns.

  Wood Security gates
 
 
 


The Electric Driveway Gate accompanied by a flanking panel on one side and a pedestrian gate with an electronic access and shouldered throughout with the #3 lighted Wood Columns. The homeowners have insisted upon utilizing a Rofu-style electronic lockset. A convenient solution to provide security when the house itself is not visible to approaching visitors. And yet CPW does not support electronic access simply because the lockset required mandates a close swing clearance, such as a front door. But a gate is exposed to the elements and a front door is insulated on one side and covered by as jamb and roof. The gate will swell and contract with the seasons, and almost certainly those lockset configured with an electronic access will not close in the wetter seasons.

  custom wood drive gates in marin county
 
 
 
    DRIVEWAY GATE #14-1
      Grid Openings: 4.27"W x 5.09" H

The original Driveway Gate #14 in Novato, CA, with both a softer arch, and wood jambs mounted to stucco pillars. The overall opening is less than 12' and does not require an embedded steel frame.

  Wood driveway Gate
 
 
 
    DRIVEWAY GATE #14-2
       

As a handsome looking entry in rural Connecticut where we have double off-set Driveway Gates where the smaller gate is available for pedestrian use. This configuration can also be seen with Driveway Gate style #2-4

  driveway gates set to stone columns
 
 
 

Here the contractor has elected to mount a steel plate to the columns using a threaded rod embedded all the way to the block core. He then welds his pivot style hinges to the steel and bolts the other end to the wood gate. (See Specifications)

  driveway gate pivot style hinges


>>>To GALLERY 2
driveway gates
The Designs of Prowell Woodworks are protected by Patents and Patents Pending.
 



1. 8 0 0 . 4 6 6 . 1 8 5 0
1 .7 0 7 . 8 2 3 . 3 7 1 1 (PST)
1 . 7 0 7 . 8 6 1 . 3 4 0 9 (FAX)

 

SHIPPING TO ALL 50 STATES
©1996-Present Charles Prowell.
The CPW Web Site was launched in 1996.
Products appearing on this site are the sole design rights of
  Charles & Ben Prowell.

Privacy


 

 

14---0813-Hanson
14-1---#0123-Anderson
14-2---0837-Childress