|
Step 1
Before installing the filter, place
the filter on the TV for a trial fit. Center the filter
top to bottom and side to side. Once you are satisfied
with placement, make a mental note of the location.
Step 2
Turn the filter over so that the back
is face up. Remove the protective tape from each of
the four interlocking Step 1 tabs.
Step 3
Place the filter in the pre-selected
position on the television. Once satisfied with placement,
press firmly in the area of each interlocking tab. The
filter is now securely installed. Should you wish to
remove TeleView to adjust its exact position, simply
pull the filter toward you, using both hands to hold
the side frames. The TV side of the interlocking tabs
will remain on the TV, so that you can reposition TeleView
to your liking. Once satisfied with place- Step 2 ment,
press firmly in the area of each locking tab, until
you feel a light snap.
After setup you will notice that your
TV picture colors are richer and contrast is improved.
Depending on your viewing preference, you may wish to
increase your TV brightness and adjust the contrast,
to meet your personal satisfaction.
|