Creek Audio A52 & A52SE, Music Hall, British Audio and HiFi Components

Soundscape Product Information


CREEK A52 & A52 SE
POWER AMPLIFIERS
Discontinued - Out of inventory!


Creek A52 Power Amplifier
CREEK A52 STUNNING PERFORMANCE FOR MUSIC. AUDIO/VIDEO AND MULTI-ROOM

The Creek A52 is a High-End power amplifier designed and manufactured in the UK. It is ready to meet the demands of most loudspeakers, giving a clear and consistent performance for years to come.

The A52 Creek's best sounding and most rugged power amp so-far. Its 75 watt power rating is achieved without compromising sound quality. The high-end circuit design also includes rapid protection circuitry to mute speaker outputs if a fault is detected. Heavy duty relays delay power-on to protect your speakers. A bi-color LED power indicator changes color to indicate status.

Flexibility is the A52's forte. The A52 can be used in multi-room situations, switched from the front panel, to power up to two pairs of eight ohm speakers in parallel or four pairs wired in series parallel. It is bi-wireable with two sets of speaker binding posts. The amplifier's slim attractive profile matches the P52 pre-amp. It can also be partnered with the 5250 integrated amp or the OBH-12.

Creek engineers have produced a multi-purpose design for music lovers. The Creek A52 amplifier proves that accurate, full-bodied sound can be affordable.

A52 InteriorUnique amongst amplifiers of its class, the A52 has fully balanced FET input circuitry with two sockets for every input, providing daisy chaining facilities to link other A52 power amps in bi-and tri-wired systems. It also has adjustable low frequency roll-off to tune the system sound.

Custom Creek circuitry uses cascaded FET differential input stage, differential FET voltage amp together with MOS-FET driver and output stage, using 4 transistors per channel to provide massive output current capability.

To enhance performance the A52SE uses two massive toroidal transformers.

 


CREEK A52 AND A525E POWER AMPLIFIERS TECHNICAL SPECIFICATIONS
 
A52
A52SE
Power Output (both channels)
70 Watts into 8 ohms
80 Watts into 8 ohms
Power Output (one channel)
80 Watts into 8 ohms
80 Watts into 8 ohms
Power Output (one channel)
90 Watts into 4 ohms
120 Watts into 4 ohms
Power Output (bridged mono)
180 Watts into 8 ohms
240 Watts into 8 ohms
Total Harmanic Distortion
<0.03% 20 Hz to 20 kHz
<0.03% 20 Hz to 20 kHz
Frequency Response (adjustable)
3 Hz to 25 kHz -1 dB
3 Hz to 25 kHz -1 dB
Slew Rate
60 V per uS
80 V per uS
Output Current
40 Amps peak
40 Amps peak
Signal to Noise Ratio
-105 dB
-105 dB
Separation
-80 dB at 1 kHz
-80 dB at 1 kHz
Transformer
1 x 200VA
2 x 180 VA
Power Consumption at idle
60 Watts
65 Watts
Power consumption at Full Power
250 Watts (10%THD)
320 Watts (10% THD)
Weight
5.3 Kgs 13 lbs
8 Kgs 17 lbs
Size
42 x 6 x 28 cm, 16 1/2 x 2 1/4 x 11"
42 x 6 x 28cm,16 1/2 x 2 1/4 x 11"

Creek Audio Limited reserves the right to modify or change the specifications of its products at any time without notice.

Our Business Hours are:
Monday - Friday 10am to 7pm Pacific Time
Saturday 12pm to 5pm.
We are closed on Sunday!


Extended Warranties Available!


ORDERING ONLINE
click here!

ORDERING BY PHONE

If there is no authorized dealer in your area you can order directly from  Soundscape with a 10-day, satisfaction, money-back guarantee.

US and Canada, 1-800-450-HIFI (1-800-450-4434)

Outside the US and Canada, (707) 578-4434

Monday - Friday 11:00 AM - 7:00 PM (PST)

Fax: (707) 578-4436 


Updated: April 22, 2002
main
page product
line comments ordering
 

Soundscape
1044 Fourth Street, Santa Rosa, CA 95404
Phone/707-578-4434 or 800-450-HIFI
marcs@sonic.net