Soundscape Product Listing
TRUAUDIO
Amplifiers
TruAudio power amplifiers come in different shapes and sizes.
For multi-room audio, we offer two 12 channel amplifiers designed just for
this purpose.
With a Great looking front panel and versatility of electronics hidden inside,
these models offer tons of features and power to enhance any installation.
Also available is model SA-250, an amplifier designed for
subwoofer use. With a simple switch, this unit goes from 2 channel power
to a high-power subwoofer amp allowing only low, bass frequencies to pass
though.
When in the 2 channel setting this model can be used to drive all kinds
of different speaker scenarios depending on the application.
Amplifiers
TruAudio power amplifiers come in different shapes and sizes.
For multi-room audio, we offer two 12 channel amplifiers designed just for
this purpose.
With a Great looking front panel and versatility of electronics hidden inside,
these models offer tons of features and power to enhance any installation.
Also available is model SA-250, an amplifier designed for
subwoofer use. With a simple switch, this unit goes from 2 channel power
to a high-power subwoofer amp allowing only low, bass frequencies to pass
though.
When in the 2 channel setting this model can be used to drive all kinds
of different speaker scenarios depending on the application.
12 Channel Amps
12 Channel Amps
MR-1260
Soundscape Price:$2000 each
add $20 for Rack kit.
12
channel, 6 zone power amplifier 66 watts per channel x 12 Flexible power amp
for any multi-room audio system Individual zone inputs or Global input 12 volt
trigger remote input Pass-through RCA's jacks for connecting additional amps
All needed certification Rack mount or non-rack mount available Available in:
black
- Design: Multi-ch. Power Amplifier
- Channels: 12 ch., 6 zone
- Power output, continuous: 66 watts per ch. @ 8 ohm 85 watts per ch. @ 4 ohm
- Bridged Power output: 130 watts per ch. @ 8 ohm
- Frequency range: 18Hz - 50k Hz @ - 2 dB
- Total Harmonic distortion: 0.05% @ 20Hz-25k Hz (8 ohm)
- Signal to noise ratio: minus 100 dB
- Dampening factor: greater than 400dB
- Input Impedance: 20k ohm
- Additional features: 12volt trigger input
- Global inputs Pass-through RCA outputs
- Tooless "snap-down" connectors
- Certification: UL, CE, CAN/CSA
- Dimensions: 5 7/8" H, 17" W, 17 1/2" D
- Actual Amplifier weight: 49 lbs
- Shipping weight: 60 lbs
MR-1235
Soundscape Price:$1200 each
add $20 for Rack kit.
12
channel, 6 zone power amplifier 38 watts per channel x 12 Flexible power amp
for any multi-room audio system Individual zone inputs or Global input 12
volt trigger remote input Pass-through RCA's jacks for connecting additional
amps All needed certification Rack mount or non-rack mount available Available
in: black
-
Design: Multi-ch. Power Amplifier Channels: 12 ch., 6 zone
-
Power output, continuous: 38 watts per ch. @ 8 ohm 47 watts per ch. @ 4 ohm
-
Bridged Power output: 73 watts per ch. @ 8 ohm
-
Frequency range: 20Hz - 25k Hz @ - 2 dB
-
Total Harmonic distortion: 0.05% @ 20Hz-25k Hz (8 ohm)
-
Signal to noise ratio: minus 100 dB
-
Dampening factor: greater than 400dB
-
Input Impedance: 20k ohm
-
Additional features: 12volt trigger input
-
Global inputs Pass-through RCA outputs
-
Tooless "snap-down" connectors
-
Certification: UL, CE, CAN/CSA
-
Dimensions: 4" H, 17" W, 13 3/4" D Actual
-
Amplifier weight: 34 lbs
-
Shipping weight: 39 lbs
SUBWOOFER AMP
SA-250
Soundscape Price:$700 each
add $20 for Rack kit.
2 channel stereo power amplifier 140 watts per channel x 2 Switching allows for 2 channel amp or mono subwoofer amp 12 volt trigger remote input. Pass-through RCA's jacks for connecting additional amps All needed certification Rack mount or non-rack mount available Available in: black
- Design: Power Amplifier Channels: 2 ch. or bridgeable to mono
- Power output, continuous: 100 watts per ch. @ 8 ohm 140 watts per ch. @ 4 ohm
- Bridged Power output: 200 watts per ch. @ 8 ohm
- Frequency range: 20Hz - 25k Hz @ - 2 dB
- Total Harmonic distortion: 0.05% @ 20Hz-25k Hz (8 ohm)
- Signal to noise ratio: minus 100 dB
- Input Impedance: 20k ohm
- Additional features: 12volt trigger input
- Pass-through RCA outputs Binding posts outputs
- Certification: UL, CE, CAN/CSA
- Dimensions: 4" H, 17" W, 13 3/4" D
- Actual Amplifier weight: 35 lbs
- Shipping weight: 40 lbs
US and Canada, 1-800-450-HIFI (1-800-450-4434)
Outside the US and Canada, (707) 578-4434
Monday - Friday 11:00 AM - 7:00 PM (PST) W
Fax: (707) 578-4436
Last Update: December 10, 2005
1044 Fourth Street, Santa Rosa, CA 95404
Phone/707-578-4434 or 800-450-HIFI
marcs@sonic.net
